EASY MOVE

TCLFFF8VG

Full frame 8-suction cups Easy-Move

• Solution for safe handling of large format tiles.

• Adjustable extension and crossbars.

• Two telescopic bars.

• Two crossbars

• Eight (8) suction cups.

• Stain-free, 7" vacuum suction cups.

• Maximum tile length : 10.5ft.

• Minimum tile length : 6 ft.

• Safety hooks.

TCLFPTB6VG

Easy-Move bars with 6 suction cups.

• Pair of telescopic bars for large format tiles.

• Six (6) stain-free, 7" vacuum suction cups.

• Maximum tile length : 10.5ft.

• Minimum tile length : 6 ft.

• Add crossbars (TCLFPTCB) and a pair of vacuum cups (TCLFVSCGCB) for full-frame.

CART

TCCARTADV

Large format cart to to be used with Easy-Move.

• A-frame cart ADV.

• Two height adjustable hooks.

• Four wheels. Two locking wheels.

• Lightweight design.

• Aluminum components.

• Maximum load of 551 lbs.

WORK BENCH

TCLFWBPLUS

Work Bench Plus for large format tile handling.

• Steel structure.

• Anodized aluminum surface.

• Extendable slats for wider work bench.

• The bench extends its slats to 5ft. width.

• Adjustable feet for perfect leveling.

• Sturdy and stable work area.

• Accessories available. See PDF downloadable.

​

            5'11" long       |       3'3" wide

TIP-TOP

TCWBFUMC

Tip-Top clamp for mitering large format tiles.

• Pair of miter clamps.

• For stair and counter top joining.

• Two (2) suction cups per clamp.

• Adjustment knobs for horizontal and vertical adjustments.

• Material thickness 1/8" to 1-3/16" 

RAIZOR

TC10RAIZOR

Raizor for large format cutting with scoring wheel and rail.

• Scoring and snapping rail system.

• Lightweight and easy to use (20 lbs.)

• Two 5.5 ft. rails connect together.

• Three (3) stain-free suction cups.

• Die-cast cutting unit.

• Fine adjustment and precise cutting.

POWER RAIZOR

TCPWRAIZ

• Universal multi-angle cutting unit.

• Plunge cut to adjust the depth of the cut.

• Tilting movement.

• Square and rectangular knock-out cuts.

• 90 degree and 180 degree tilting motion.

• 45 degree miter cuts.

• Wet and dry cutting.

• Use proper GFCI protection around water.

Power Raizor multi-angle cutting device.

TCPWRAIZBU

Power Raizor box.

• Power Raizor box unit only.

• Grinder and blade not included.

• Multi-angle cutting unit box.

• Use with Raizor cutting guide (TC10RAIZOR)

• Use proper GFCI protection around water.

POWER MITER

TCLF45DB

• Perform 45 degree cuts.

• Fast and precise mitering.

• No rail required.

• Use with 4.5" cutting blade.

• No length limit.

• Two handles to allow necessary pressure.

• Knob calibration for adjustment.

• Anti-scratch plastic slides.

• Dry or wet cutting.

• Use proper GFCI protection around water.

Power Raizor miter device. 

FINISHING TOOLS

TC5LFSPLT

• Cutting off pliers for tiles and slabs.

• Tile thickness 1/8" to 1/4"

GPDP200

• Diamond pad for finishing edges.

• Grit of 200.

• Ergonomic design.

• 2-1/4" by 3-1/2"

TCLFPLT

• Cutting-off pliers.

• Material thickness of 1/4" to 1/2"

• Score the tile using the Raizor guide (TC10RAIZOR)

• Maximum pressure applied by turning the knob.

• Minimum effort required.

GPDP60

• Diamond pad for finishing edges.

• Grit of 60.

• Ergonomic design.

• 2-1/4" by 3-1/2"

GPDPGKIT

GPDPVDP

• Velcro driver pads.

• 4" diameter.

• Use with finishing dry pads.

• Fits 4" and 4.5" angle grinders.

• Seven (7) sanding pads.

• Dry finishing.

• 4" diameter pads.

• For finishing a variety of porcelain tiles.

GDFD60

GDFD200

• Grinding disc for shaping tile.

• Grit of 60 flap disc (RED)

• Grit of 200 flap disc (GREEN)

LTBBLF

• Rubber tile beater.

• For large format tile.

• Improves adhesive bonding.

• Anti-bounce.

• Sturdy metal framework.

• Off-set handle.

• Helps expel air from adhesives.

VSVOLPINO

• Vibrating system for tile setting.

• Motorized tile beater.

• Expels air from adhesive under tile.

• For large format tile.

LTKOMP50

• Komp 50 device.

• Performs circular cuts.

• Center and off-center cuts.

• Cuts of all size can be achieved.

LTDALF

• Closer device.

• Aligns large format tiles during installation.

• Each side contains three (3) suction cups.

• Each side holds a different tile.

• Use knob in middle to close and align the tile.

LTCP4

• Tile corner protectors.

• Use on tile 1/8" to 1/2" thick.

• For large format handling.

LTMOTOKOMPAS

Kompass tool for circular cuts and bullnose.

• Device to create circular cut-outs.

• Create rounded corners.

• Score the tile and/or finish circular edge.

• Minimum 12" diameter.

• Maximum 40" diameter.

• Half bullnose profiles.

• Tile Thickness of 1/4" to 1/2"

• Scores tile just like the LTKOMP50

• Use dry or wet.

• Use proper GFCI protection around water.

• See PDF downloadable file for more info.

RAI FIX

LTGT

Safety hook system for large format tile on vertical surfaces.​

• Grooving tool for RAI FIX support system.

• Applies a groove to back of tile.

• Comes with adjustable stainless steel box.
  Vacuum connection
  Variable speed grinder
  5" diamond blade.

LTGTB

• Grooving tool box for support system.

• Comes with Adjustable stainless steel box.
  Vacuum connection.

LT5AT120

LT5AT500

Safety hook to be applied directly on surface with tile.

• Mechanical support system.

• For vertical large format time installation.

• 5mm porcelain tile thickness.

• For tile larger than 24" x 24" will require an extra anchor.

• Comes in quantity of 120 or 500.

LT6AT120

LT6AT500

Safety hook to be applied directly on surface with tile.

• Mechanical support system.

• For vertical large format time installation.

• 6mm porcelain tile thickness.

• For tile larger than 24" x 24" will require an extra anchor.

• Comes in quantity of 120 or 500.

LTAT70

LTAT120

LTAT500

Safety hook to be applied directly on surface with tile.

• Mechanical support system.

• For vertical large format time installation.

• 8mm or greater porcelain tile thickness.

• For tile larger than 24" x 24" will require an extra anchor.

• Comes in quantity of 120 or 500.